Monoprice 104777 XLR to RCA Cable - 1.83M (6ft) M/M, 16AWG Oxygen-Free Copper Conductors, Gold Plated Connectors - Premier Series

Product Information

A true XLR cable with XLR connectors on both ends should offer a clean, and secure connection with little external noise or crosstalk. They can do this over longer distances too, up to 50ft in some cases, thanks to the internal protections. Where an RCA cable may begin to show the effects of signal noise or crosstalk over a relatively short distance, that’s not the case with XLR. For starters, RCA cables are much cheaper than XLR cables, often costing around half as much for a comparable length cable. This can make them much better suited in situations where budget is more of a concern than signal quality – especially if the connection is likely to be just a few feet long, where signal loss is less likely to occur. It is common to find RCA connectors color-coded, yellow is for video, red for the right audio channel, and white for the left channel. Search around on the internet there are lots of tutorials about DI boxes, their use, and explanations.

The Clearway is really like a souped-up C-Line, with heavier-gauge, oxygen-free copper conductors, upgraded insulation and silver plated VEE 3 RCA plugs. And we could use the same line to describe its performance." (Read More) This offering from Tisino is an adapter not a cable with different ends. That means it is approximately 2.36 inches long and designed to slot straight into your male RCA output on your device. At the other end of the adapter is a standard three-pin XLR connection which is waiting to receive your XLR cable. On the flip side, If you own a high-end set-up, we'd suggest looking at price-comparable interconnects but you could also audition some cheaper interconnects too. Standard wiring for an XLR is Pin 1: Signal ground - normally connected at the receiving end only to avoid earth loops, Pin 2: "Hot" or positive phase signal, Pin 3: "Cold" or negative phase signal. An old American standard had the positive and negative lines swapped, so pin 3 became the "Hot", but practically, this makes no difference, provided everything in the system is wired the same. In contrast, the XLR connector has three pins, or slots to accept the pins n the female version. XLR stands for External Line Return. The central pin carries the ground while the other two are both active. This has two benefits in that the supply is balanced and you don’t get the hum when plugging XLR connectors in.

Enhance Your Experience: Free Cable Burn-In Service with Nordost VIDAR Machine

If you have a female RCA connection then you are going to need a male connector, making the Monoprice male to male RCA to XLR cable one of the best options. You usually see balanced cables with XLR connectors. One pin called the “hot pin” carries the signal, another pin carries the signal inverted and the other pin is the earth. At the other end of a balanced connection, the noise common to the signal on the hot and cold pins is cancelled out. Professional devices will typically offer XLR and it’s important to use XLR on both ends. A cable that is an XLR to RCA converter, for example, will only offer an unbalanced signal, even when using XLR on one end.

RCA cables are also more versatile, in that they can handle video transmission too, and are found on a wider range of consumer electronic devices. You’ll find it particularly difficult to hook up an old games console to your TV using XLR cables alone, even if technically the XLR cable would be a higher quality cable to use. RCA cables, on the other hand, are commonly supported on a wide range of devices, making them a far better choice – even if more modern alternatives like HDMI and DisplayPort are more capable and versatile again.This cable adopts the same approach as the other options on this list, namely that the number two connector I the live terminal of the RCA and the RCA ground goes to terminals one and three. XLR cables are also incredibly robust. They’re big, with chunky pins and a metallic ring shield which further protects the internal wiring and the integrity of the XLR plug at each end of the cable. This makes them well suited to situations where you may be repeatedly plugging and unplugging different devices. There are various DI's on the market, both "active" as "passive" with different price tags and different specifications. Active DI's will require a power source/supply. Unbalanced cables like RCA, on the other hand, only have two wires: a signal wire and a ground wire. While they’re cheaper and easier to use, unbalanced cables are more susceptible to interference and noise. The metal jutting out piece is the part that carries the electrical current. The circular ring of the main section is the ground. This is why you often get a hum when you plug them in, for a split second the connection is not grounded.

If you currently own an excellent entry-level set-up you don't need to spend big on interconnects. However, at the same time, there's nothing stopping you from trying more premium pairs to see how your system reacts. As you can see from our list below, there are some brilliant budget options available. Signal Transmission: The burn-in process establishes the directionality of the cable, optimizing signal transmission from one end to the other. An XLR connector is capable of carrying a more powerful electrical current, this can be useful when you want better quality or simply louder sounds.

UK Delivery

Available in a range of lengths, XLR cables are also convertible and adaptable, leading to XLR to TRS converters, and XLR to RCA cables, among others. The three-pin design offers a balanced connection, thanks to its combination of positive and negative internal wiring, alongside a ground wire. Although they can be used for high-voltage power delivery, they are primarily used for digital audio transmission and do not handle video signals.

If you have any interest in music then you will have heard of RCA and XLR, they are two different types of connectors that can be used to transmit audio signals from one device to another. An RCA to XLR adapter allows you to use devices with different connections and still get good sound quality. The ultimate outcome of conditioning cables with the Nordost VIDAR is improved sound staging, increased detail, and an overall more musical presentation in your audio system. For all those doubters out there stop bleating about a multi million pound industry being a load of old cobblers, if it was then by now those that spend vast amounts of money would have just fitted bell wire because if they don't here an improvement then they would look else where, that's because they can afford to.Knowing how to choose between an XLR and RCA cable is important, because in some cases it can mean the difference between a high-quality sound and a poor quality one. However, in most cases that won’t be a problem, especially if you’re working with devices and technology that is any level below professional. XLR cables are typically used in professional settings for audio, video, and stage lighting equipment. They commonly have three pins, but can have up to 10 in some cases, and have been around in one guise or another since the 1950s. The most common three-pin variant of XLR cables are used in almost all professional-grade microphones and have been common in some commercial speaker and subwoofer designs in the past. They also see use in some PA systems.