276°
Posted 20 hours ago

NZXT H710 - ATX Mid Tower PC Gaming Case - Front I/O USB Type-C Port - Quick-Release Tempered Glass Side Panel - Cable Management System - Water-Cooling Ready - Steel Construction - Black

£10.94£21.88Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

GPU dT was 52.4C dT in this test, similarly competitive but also outperformed by the O11 XL, which had fans positioned directly under the GPU in our configuration. The quantity of fans means that no matter how slowly they spin, they’re still pushing a uniform wall of air through the body of the case and effectively cooling the components within. Conclusion Remember, the plan is to get the H710 installed and running under ESXi 6.7 first and then upgrade to ESXi 7.0 later, once the H710 has settled in. The H710 and H710i PC cases share the same measurement having 230 mm (9.06 in) width x 516 mm (20.31 in) height x 494 mm (19.45 in) depth with its feet. They are both made of SGCC steel and tempered glass and weigh around 12.1kg. At time of writing this post, it has been just over four and a half months since my original missing PERC post and unfortunately - although not really unexpectedly - there has been no release of an ESXi 7.0 compatible native driver for the H700 or LSI 2108 based array controllers in general. Bugs fixed (compared to earlier release of driver): Fixes a potential issue where in a clustered configuration snapshot, VMotion, and cloning operations could fail when writing to shared storage.

Building a PC can be a difficult task. Every small detail, from the processors to the RAM, must be scrutinized. The computer case is one area that many people overlook, and however, it is one of the most important decisions you will make when building your PC. It is recommended to use a riser cable with a minimum length of 200mm with a right-angle connector. While you can use a straight connector with the case, it may not look the cleanest when the system is assembled. To summarize this review, both the NZXT H710 and H710i offer luxury with simplicity and durability. They are arguably classy, stylish, and premium, with the high build quality. The H710 and H710i are both excellent cases, and each of them has outstanding characteristics that contribute to its effectiveness. The factors to consider before deciding between the two are summarized below.The H710 and H710i are two of the H-series PC cases that are well-known for their high build quality, durability, ease of setup, and affordability. Furthermore, both the H710 and H710i come pre-installed with RGB lighting, which adds character to your finished build by utilizing the tempered glass side panel. They both have enough space inside, which can support the same number of fans and radiators. Potentially you could cross vendors too - say replace an Lenovo / IBM ServeRAID M5015 with a Intel RS25DB080… well, you get my drift. Load testing is conducted using Prime95 LFFTs and Kombustor “FurMark” stress testing simultaneously. Testing is completely automated using in-house scripting, and executes with perfect accuracy on every run. CPU Torture - NZXT H710 Review

Do you have any questions not covered by this FAQ? Please feel free to reach out to our Customer Support team or join the Official NZXT Community Discord to keep up to date on our latest products, upcoming sales, and join in on discussions on everything from PC hardware to gaming. Looking through the Dell spec sheet, the H710 is based on the LSI SAS2208 chipset. Again, LSI being LSI, the SAS2208 chipset is used in many, many other array controllers. Here’s just a small selection of some of the more popular cards:

The Firestrike Extreme stress test on loop raised GPU dT to 50.7C, just a little warmer than the original torture test and therefore even more competitive with the other cases, where the firestrike test often raises temperatures by a couple degrees. It lands between the PM01 and the H500M Mesh, largely beaten out by the group of cases with bottom intake GPU cooling solutions like the HAF X and the RV02. Standardized Fans The H710 mini is designed to fit into a later 12th generation (PowerEdge Rx20) servers as can be seen from it’s proprietary connector: If you were looking at the front of the H7 and though “but where’s the airflow going to come from?”, the H7 Flow is the case for you. The H7 Flow is the same case as the standard H7, including the same fans out of the box, internal layout, and price point. There are only two differences between the H7 and H7 Flow, and those differences are the case’s front and right panels.Â

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment