sourcing map 304 Stainless Steel Round Tubing 10mm OD 1mm Wall Thickness 250mm Length Seamless Straight Pipe Tube 2 Pcs

Product Information

This tube is produced by the helical forming and automatic welding of a continuous strip of stainless steel. Primary material used in the production of welded stainless pipes are previously hot/cold rolled sheets and plates. These more workable primary products have their edges heated and then pressed together using a series of rollers.

is the most used standard commercial grade as it has good corrosion resistance and good machinability. has much better corrosion resistance and is the grade recommended for marine environments or coastal applications. The choice between seamless and welded stainless tube is dependent on the particular application and purpose of the end product. Each manufacturing method provides tubing with different beneficial characteristics. Seamless tubes tend to be more light weight with thinner walls, while welded tubes are heavier, more rigid and therefore typically straighter. Which industries utilise stainless steel tubes in their manufacture?If you’re looking for high-quality, steel hollow section products available for immediate dispatch, Metal Supplies™ are the company you need and we’re happy to help with your project, whether you’re a business or domestic customer.

Due to their versatile nature stainless tubes are widely applicable ranging from manufacturing to household purposes. Perhaps the most common application are stainless tubes as conduit pipes. Pre-coned tube lengths of hardened or annealed tubing are available from 2 to 120 in. (5 to 305 cm) in length. Tube lengths are precisely coned with a high-quality finish. Specifications Material Stainless steel tube can be joined by welding, which facilitates rigidity in construction, or using mechanical fittings which enables dismantling for hygienic cleaning.Stainless tubular and pipe products available in our online shop include nominal bore pipe (along with a complimentary range of butt weld fittings and flanges), square and rectangular hollow sections, hygienic tubes, metric tubes and handrails. Our tubes and pipes are available in either seamless or welded with various mill finishes. Stainless steel tubes are available in welded or seamless. Where the presence or absence of a seam determines the relative manufacturing process. The tube is produced by drawing through a hardened steel or tungsten carbide die, at room temperature. The purpose of cold drawing is to reduce the OD or wall or both, to produce a smooth surface finish and to break up the weld structure, which results in recrystallisation when annealed. This tube is typically destined for heat exchanger applications and is produced in a similar way to AWA product except that the internal bead is rolled flush with the inside tube surface prior to annealing.

Swagelok pre-insulated traced tubing bundles provide reliable process temperature maintenance in a variety of analytical and process instrumentation applications, including impulse lines, sample lines, and process lines and provide an economical choice compared to field tracing and insulating. The parallel configuration—process and tracer lines are parallel inside the bundle—allows all tubes to bend together in as little as an 8 in. (20.3 cm) radius in tubing sizes up to 3/4 in. or 12 mm, so the bundle is easier to route and connect in the field than cabled bundles. Specifications Materials At The Metal Store, we offer an extensive range of stainless steel tube (or pipe) products in grades 304 and 316, as well as stainless steel tubes for tube clamps in grade 304. Stainless steel is generally corrosion resistant. Stainless tubes are therefore very durable with a long lifecycle and particularly low in maintenance. This longevity means stainless tubes are a very cost effective material. Finishes or appearance range from unpolished to highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to mirror appearance. Finishes are selected to suit application and aesthetic appeal. This tubing is produced direct off the continuous tube welding mill, using cold rolled stainless steel strip made to ASTM standards, with tube produced to commercial limits of straightness in standard or specific customer lengths. AW tube has a higher yield point than annealed tube and is generally used for decorative applications or in mildly corrosive conditions. It is not suitable for applications requiring significant flaring, expanding or bending.

Whatever your needs, The Metal Store can provide the perfect stainless steel tube or pipe. We offer 3 and 6 metre lengths, with diameters from as small as 8mm up to 16mm in grade 316, and ¾” to 2” in grade 304.