Witter Towbars ZX202 Bolt-on Towball Mounted 2 Bikes Carrier,Black

Product Information

Step 9: For the second bike, use the second set of wheel locators and clamp it in the same way as the first bike, securing it tightly with the ratchet straps. The last bike should be the smallest and lightest of all of them. Our three and four bike carriers are designed to carry a maximum load of 65 kg, which corresponds to 3 to 4 adult bikes. This is a hanging bike carrier that fits to the towbar faceplate. It allows you to tow and carry bikes at the same time and is suitable for carrying eBikes. You can carry up to 3 bikes at a time and the weight of the bikes is fully supported by the towbar.

Step 5: Now its level, attach and tension the support straps. Then attach the other hooks to the tailgate or boot at a suitable point. Make sure this position is stable and strong enough to hold the weight of the carrier and cycles. Step 6: Attach the plug to the vehicle ensure the plug is fully inserted and that the cable cannot touch the floor. Start your adventure off right with the New Pure Instinct platform style cycle carrier from Witter, created with you in mind. Every platform bike carrier is different and will come with a specific set of instructions, so you should always follow these.Exceeding this load invalidates the warranty of the bike carrier, vehicle and the towbar. Any "clip" on accessories, e.g. pumps, bottles, bags etc. should be removed to reduce weight. Our towball-mounted Pure Instinct bike carrier is high quality and can be easily attached to your towbar with a clamp mechanism. It is available as a 2, 3 or 4 bike carrier and has foldable rails for when they are not in use. It can also be tilted for easy access to the boot but is not suitable for eBikes. Load your bike once you are ready to leave, not the night before your journey. You should not leave your bikes unattended when they are loaded onto your car

Step 6: Fit the protective cap onto one of the plugs, then attach the plug to the vehicle using the appropriate seven or 13 pin electrical connection. Ensure the plug is fully inserted and that the cable cannot touch the floor. This cycle carrier is superbly designed to make operation and installation as simple as possible. But to ensure safety, and to avoid any damage to your vehicle or bikes, we're going to run through the installation procedure. Some models will have a unique 'Park Mode' that allows it to be legally driven in the folded up position. In 'Park Mode', the lighting board will flip down to show the number plate and lights. The ZX302 platform style cycle carrier from Witter takes up to two cycles of any size including a child’s.

What do you need to get started?

This is a platform bike carrier which has a tilting feature for easy access to the boot. With easy coupling and adjustable wheel holders, it is suitable for most towbars and can carry most bikes, including eBikes.

Continue to load any additional bikes in alternating directions, leaving the lightest bike until last, and secure all bikes in place as detailed aboveIt carries two bikes but an expansion rail is available so you can carry up to 3 bikes. It is also available with a carrier bag, platform and transport box. However, it is essential that the combined trailer nose weight and weight of the cycles does not exceed the maximum towball nose load, as specified by the vehicle manufacturer.

how to pump and change a bike tire as well as the best family bike rides in the UK. That way, you can be well prepared for heading out on your bike armed with a fun cycling route and the knowledge of how to maintain your bike if you do hit a bump in the road.Starting with the heaviest bike, lift it into position or use a drive-up ramp and load this bike closest to the vehicle