Dell U2715H 27-Inch Widescreen IPS LED Monitor

Product Information

starts. All in all, it's still only a 6.9mm edge around the image which looks very nice in practice and should be A: The Automatic Display Control (ADC) feature can take a number of minutes with the UltraSharp, due to the complete control of the hardware offered. The current version of the software does not have a cancel button available until the ADC feature completes. We would recommend that you allow the ADC process to complete to avoid having the display end up in an unstable color condition. A: GB LED is the specific illumination hardware that is used by the UltraSharp. This is automatically selected when the software recognizes the UltraSharp is in use. Many other displays use other lighting technologies, such as White LED. GB LED illumination offers many technical advantages in rendering more accurate color on-screen.

A: The recent versions of the MacOS have restricted the access to the System Level Library folder. Saving your profile to the User Level is correct. An expert user could change this setting, but we advise against it. When investigating a " difference" in UltraSharp vs. another display, you should obtain the ICC profile that the DUCCS software saves. You can simply drag and drop that profile onto the ICC profile icon in the workflow, and that loads all the settings that are used for that other display’s profile. This gives you a demonstration of how the settings appear and if these settings for the two displays make them look similar. Also consider is the viewing angle each display is using. LCD displays do not have the same color response off-angle, and it is likely that when using two screens you will sit in front of one, or between the two resulting in a different viewing angle for each display. A: Many design creative users want to use the full color gamut possible on the UltraSharp, and do not require that the display correspond to any industry specification. Alternately, the UltraSharp offers the ability to be set for use with industry color space descriptions such as AdobeRGB and Rec. 709. Your specific choice varies depending on your needs. ICC profiles and gamma corrections. The screen was tested at default factory settings using the DVI interface, and analysed usingA: Although we would like it if you owned more than one DELL branded display, you can use the DUCCS software with a non-DELL display. dE colour accuracy of <3 (the U2713HM had dE <5 target). A copy of the calibration report from our unit isprovided below for reference: A: Ambient light levels can be expressed in different units of measurement. Lx refers to Lux, and would be a unit of measurement that is used in video or scientific environments. Cd/m2 refers to Candela per square meter, and is a more commonly used unit of measurement in the photographic and printing industries. A: Yes. Owners of X-Rite i1PRO2 and i1Pro spectrophotometers can also use this program for display calibration. A: Keep in mind that your DELL requires approximately 60 minutes to stabilize for best color results. The DELL has both DisplayPort (DP) and High Definition Multimedia Interface (HDMI) inputs. Keep in mind that you may see different results due to cabling and input method.

Q: I have entered the Automatic Display Control mode, but need to stop the process. Where’s the Stop or Cancel button? A: This is caused by comparing two displays of different manufacturers, often with different display quality levels.The screen’s colour accuracy was outstanding, as our colour calibrator showed it was already displaying 100% of the sRGB colour gamut at its default settings. With such a perfect score, we had no need to calibrate it, and its colour coverage was incredibly deep across red, green and blue colour spaces. This is one of the few screens we’ve seen that doesn’t require colour calibration out of the box, and it even performs well in wider-ranging colour gamuts, managing 99.5% of Adobe RGB, too.

of any overshoot artefacts in this mode which was pleasing. When you switch to the 'fast' setting, the A: Yes, the Advanced mode offers direct control of the color control hardware that is built into the DELL UltraSharp, and can produce a better result.The Advanced mode uses the Automatic Display Calibration feature and do an in-depth setting of the hardware color controls in the display before displaying the colors needed to create a profile. Using the Advanced mode gives an excellent result, but will take a longer time. Graphics professionals and color critical users find many industry specific option choices available in this mode. Note: These FAQs assume that the owner of a DELL UltraSharp monitor can use the menu options and physical controls of the display.