ELAGO Nest Classical Wall Plate - White

Product Information

Pull the thermostat wires through the hole in the steel plate. Then secure the plate to the electrical box with two of the included short screws. Hold the trim plate against the wall and use the bubble level in the thermostat base to make sure everything is level. Note:Only one of the wires that go into theconnector (HUM,DEHUM,E,W 3,G 3) can be connected to the Nest thermostat. The 3rd-genNest Learning Thermostat supports systems with either multiple fan speeds (G 2/G 3) or with multiple stages of heating (AUX/W 2/W 3) and cooling (Y 2).

Nest Thermostat Trim Kit - The Home Depot Google Nest Thermostat Trim Kit - The Home Depot

Nest thermostats do not provide power to your home’s heating system. The thermostat only tells the system when to turn on or off, so the system needs to be connected to your home’s power. In most homes, installing a Google Nest thermostat is an easy DIY project that takes about 20-30 min. The Nest app’s step-by-step instructions make it easy to install and wire your thermostat, so use it as your main guide. Refer to this article if you need extra help.

Why Is Resetting the Nest Thermostat Necessary?

TheNest Thermostat E works with 85% of 24 V heating and cooling systems, including gas, electric, forced air, heat pump, radiant, oil, hot water, solar and geothermal. If you have a dual fuel system, a whole-home humidifier/dehumidifier or a multi-speed fan, it is strongly recommended that you choose professional installation. Place your thermostat 0.75 to 1 m above the floor on a flat surface . If you place it too low, this can affect the temperature reading and run the system longer since it’s generally cooler closer to the floor. The app will show you how to install your thermostat. It will ask you some questions about your thermostat wires. Answer them as accurately as possible.

Nest Thermostat - How-To Geek How to Install and Set Up the Nest Thermostat - How-To Geek

Nest Thermostat works with most 24 V heating and cooling systems, including furnaces, air conditioners, boilers and heat pumps with either forced-air or radiant delivery. The Nest Learning Thermostat is designed to work even if your home doesn't have a commonCwire, but installing a newCwire or the Nest Power Connectormay be required in some cases.Important: Because your thermostat works best when it stays in one place, you shouldn’t move it after you’ve chosen a good spot. Features like automatic switching to Eco Temperature depend on your thermostat being able to get consistent temperature and activity readings from the same spot in your home. To use your phone to control your thermostat, get monthly updates on your energy use and more, your thermostat will need to be set up, connected to Wi-Fi and added to the Nest app. Fil pilote system wiring Heating and cooling:1 stage of heating (W1) and cooling (Y1) and a second stage of either heating (W2) or cooling (Y2). Fil pilote systems are compatible with both the Nest Thermostat E and 3rd-gen Nest Learning Thermostat, but the wiring is a bit different.

Wall Plate Cover Compatible with Nest Learning elago Aluminum Wall Plate Cover Compatible with Nest Learning

Make sure that your thermostat is within wireless range of the Heat Link (30 m maximum). To control your system, your thermostat needs to be connected to Heat Link. If the connection is not strong, it may not be able to heat your home. Choose a room or area that people in your home use the most. Your thermostat uses activity sensors to determine when you’re home or away so that it knows when to switch to your Eco Temperature to help save energy.

Install your thermostat on the wall

Because Nest Learning Thermostats sometimes require changes to the thermostat wiring, it’s recommended that you have yours professionally installed to keep you safe and avoid damaging your system or thermostat. If you have a dual fuel system it is strongly recommended that you chooseprofessional installation. The Nest Learning Thermostat is designed to work even if your home doesn't have a commonCwire, but installing a newCwire may be required in rare cases. Avoid placing your thermostat near heat sources or in drafty areas. Your thermostat senses the temperature in the area that it’s in to decide when to turn on the heat to keep you comfortable. Place your thermostat away from anything that would cause the temperature to be artificially high or low, such as drafty windows, radiators, fireplaces or continual direct sunlight. The Nest Learning Thermostat works with 95% of 24 V heating and cooling systems, including gas, electric, forced air, heat pump, radiant, oil, hot water, solar and geothermal. This is based on data gathered through Nest’s online compatibility tool.